The Excel RV Tankless On-Demand Water Heater # EX93FR is not meant to be mounted outside but can be mounted pretty much anywhere inside of your trailer with the exception of a bedroom or bathroom. It just requires 3" of clearance on the sides and 8" of clearance above.
It does not have freeze protection but it does have an ODS in place that will not allow unit to operate unless ventilated with adequate oxygen levels. view full answer...
Thank you for the all the information you provided it made it a lot easier to find the correct brakes and bearings for your 2015 Highland Ridge Mesa Ridge Travel Trailer. You'll need the Lippert Electric Trailer Brake Assembly # LC44QV and Lippert Electric Trailer Brake Assembly # LC64QV for the brakes.
For the bearings you'll need the Bearing Kit, LM67048/25580 Bearings, 10-36 Seal # BK3-300. view full answer...
Yes if you wanted to install the Electric Jack w/ Footplate # EJ-3520-BBX that you referenced turned at a different angle you certainly could since the bolt pattern allows for that. view full answer...
The Hub Bearing Kit # BK2-100 contains the bearings, races, grease seal, cotter pin and tang washer for one hub on your 2020 Highland Ridge Mesa Ridge 26bhs. The Seal Puller # PTW1219 and 7-Piece Installation Set for Bearings, Races, and Seals # PTW83020 will aid you in the removal and installation of the new components.
If you find your brakes are worn we also have the Electric Trailer Brake Kit # AKEBRK-35-SA that is self adjusting like your original brakes. And the Easy Grease Trailer... view full answer...